Sailor's Solutions LLC      
 
product<br>image
Click to Enlarge

WP020 16-14 Ga. Male Quick Disc. .250" Tab (pack of 12) Made in USA
Waterproof triple layer technology forms the best watertight seal!
$9.95

View Cart

Problem:
It's an undisputed fact that most electrical problems on boats are traceable to failed connections. Most heat shrink connectors use a stiff and relatively short nylon insulating jacket with internal adhesive. Nylon jackets are difficult to heat-shrink and burning your wire jacket is a common occurrence. An extra heat shrink tube on the outside usually helps but often times makes for a sloppy looking job that defies inspection.

Solution:
Now it's easy to get secure professional-looking results with these amazing waterproof wire crimp connectors! Our waterproof connectors are far superior to typical after-market crimp connectors available. These connectors crimp down strongly and have a nylon protective jacket covered by a soft long polyolefin shrink jacket with lots of internal waterproof adhesive. This crimp gives your wire a strong strain relief and a waterproof seal. Once you work with our connectors you won't be satisfied with any others. We guarantee it!

Features:

  • A triple layer of protection around a 99.9% copper tinned connector provides the industry's most rugged and environmentally secure design.
  • Color-coded nylon insulation provides excellent puncture resistance.
  • Adhesive lining blocks out water and adds superior tensile strength and strain relief, while the outer layer of extra long clear polyolefin shrinks down around the wire sheathing to allow a complete environmental and abrasion resistant seal.
  • Seamless 99.9% copper tube for maximum strength and conductivity.
  • Three protective insulating layers.
  • Nylon inner layer adds mechanical strength and impact resistance.
  • Aggressive proprietary adhesive seals out moisture and provides strain relief.
  • Outer layer of clear extra long polyolefin shrinks easily without burning your wire jacket excellent abrasion resistance while allowing high visibility for inspection of the connection.
  • Nylon layer is see-through and color-coded to insure proper installation.

All connector sizes are bulk packed in 12 packs to save you money. Truly a superior product at a breakthrough introductory price!

* Meets or exceeds all UL and CSA requirements

product<br>image
Hooknife with 29 to 46 inch adjustable handle.
Clears lines fast!
$86.00
product<br>image
Ultra Tef-Gel - Anti-Seize Lubricant for fastening stainless screws to aluminum
Non-lanolin 100% synthetic formula US Navy spec.
$15.49
product<br>image
Signal Mate 2NM LED Tri-Color plus Anchor, Wind Indicator Illumination and Daylight Sensor (bracket included)
Compact and rugged Designed for many years of operation. Daylight sensor turns Anchor light on/off Made in USA!
$310.00
product<br>image
VelcroŽ Brand Marine Grade Hook and Loop,
2-inch-wide, waterproof adhesive-back. Sold by the foot in white or black

Solve onboard mounting problems fast! A little goes a long way!
$4.99
product<br>image
Signal Mate 3 NM LED Anchor Light with Photocell that Turns light on at Dusk and off at Dawn
Compact and rugged Designed for many years of operation Made in USA!
$219.95
product<br>image
Perfect Pole Telescopic Handle for Hooknife Rated #1 by Powerboat Reports!
This is the best pole/handle for our line slicing Hooknife. Extends your Hooknife's reach by 6'
$34.95
product<br>image
Winch Handle Holder

$24.95
product<br>image
Signal Mate 2NM LED Tri-Color & 2NM Anchor with Wind Indicator Illumination Includes mounting bracket
Compact and rugged Designed for many years of operation Made in USA
$285.00

Go to top of page.