Engine Room → Soundproofing → SPM24
Click to Enlarge	Click to Enlarge

SPM24	Large Soundproofing Kit - 24 tiles typical 36'-42' boat engine compartment (1 inch X 1 foot X 1 foot tiles) Temporarily out of stock. PLEASE NOTE: We are temporarily out of stock due to material shortages. We estimate restocking by March. We're sorry for any inconvenience. You're going to love the quiet motoring!	$215.54	View Cart

Introducing SPM™ Auxiliary Sailboat Engine Compartment Sound Proofing Peel & Stick Tiles

The iron wind is an unpleasant necessity for most sailors. Aside from the fact that you are not actually sailing, you are accosted by the shear brutality of that noisy SOB below. No, not him/her. You know what I mean, that loved and hated device that is driving you forward. Still stumped? I mean the diesel, damn it, man, the diesel! Read on...

Think of how pleasant cruising would be if you didn't have to listen to your diesel hammering away in your engine compartment. Why put up with it? That was our thought when we first took on this project.

We searched for the best sound dampening technologies available and found SPM's formula currently being used in engine compartments in the trucking industry. We were very concerned about the durability of the flimsy multi-layered products sold nowadays to boaters. It just doesn't make sense to put a soft thin layer of thin metallic fabric facing your engine. It tares and crumbles as you already may know and becomes an ineffective mess after only a few years.
On the other hand, a modern truck's cab is quiet and comfortable. That's kind of amazing considering there is a 500+ horsepower monster on the other side of the bulkhead. It's soundproofing is durable, stays put and most importantly very sound deadening. Basic acoustical engineering and good polymer chemistry solved the problems. Why not solve the noise problem in your beloved sailboat the same way?

Here's what we came up with. You'll be amazed at what you don't hear!!

Sailor's Solutions took this high tech acoustical product from "under hood" and added a rugged easy to clean surface on one side and a very aggressive "peel and stick" adhesive on the other side. We then die-cut it into one-foot squares for ease of installation in tight spaces.

I couldn't believe my ears! How did I put up with that noise for so long? It was easy to install too!

Some lifestyle benefits after installing SPM in your boat:

1. You can call orders below and know you will actually be heard. (No more excuses!)
2. WARNING: The diesel can't drown out your obnoxious comments so be careful what you mumble. Your crew will hear you.
3. You will be able to listening to the radio or even music while steaming along like a gentleman.
4. Your temper will improve dramatically (we hope).
5. No wind? So what, your quality of life isn't going to suffer anymore.
6. Enjoy the new clean and professional look of your engine compartment.

Here's what some users are saying:

• Just a short note to let you know how well the sound insulation worked out. The difference is amazing.
  Alan J., S/V SKOL Catalina 400
  
  
• I used a 6 panel kit to sound insulate a small cabin air conditioner in the owner's stateroom... excellent results; easy to install, easy to custom cut, very good product.
  Bruce
  
  
• Dear Nick, The tiles have been installed, they are great! Thank you for such a great product!! Sincere regards,
  B. C., WI
  P.S. So easy to install!! My friends said that it sounds like the engine is on another boat!
  
  
• This is my second order, Great Product!
  D.M., PA
• Great product. It sounds like a new boat.
  R. T., FL
  
  
• Wow, that's quiet!! - and I only did the part inside the cabin.
  JT., FL
  
  
• I love it! What a nice improvement. I'm going to recommend SPM to all my cruising friends.
  PC., DE

SPECIFICATIONS:

• Up to 90% diesel engine noise reduction
• Size: One-foot by one-foot tiles
• 1 1/8" thick sound dampening foam with hard polymer sound disrupting surface
• Peel & Stick System
• Flexible around curves down to a 3" radius
• Hard, durable, high temperature silver surface

Click here for Frequently Asked Questions

Click here for Easy Installation Instructions

Protective Film Removal

SPM tiles have a protective film that should be removed during installation. The film is lightly adhered to the tile and removal can be assisted using a strong tape to lift the corner as demonstrated in this video.

Installation Demonstration

In the following video, one of our customers demonstrates the installation of SPM tiles

Featured Items
Signal Mate 3 NM LED Anchor Light Compact and rugged Designed for many years of operation. Mounting bracket included Made in USA! On Sale Now. MSRP $224.00, Now $185.00! $189.95	Outdoor Collapsible Solar Lantern. Luci Outdoor 2.0 $19.95	Perfect Pole Telescopic Handle for Hooknife Rated #1 by Powerboat Reports! This is the best pole/handle for our line slicing Hooknife. Extends your Hooknife's reach by 6' $34.95	Smartlock stainless steel security cable (16 feet, 5 meters) (in stock) $98.95
Razor sharp HOOKNIFE clears lines fast! Hook and pull action slices entangled lines from your prop or rudder! NOT CURRENTLY STOCKED. Please see our new longer Hooknife in stock here: Hooknife 2 $84.95	Laser Rescue Flare Hand-held day and nighttime laser signaling device. $99.95	SCAD LVA Low Voltage Monitor with Alert & Relay It's programmable! Don't let your batteries go low without warning Shuts off or turns on electrical devices automatically $79.95	Signal Mate2NM BiColor Bow Light with adjustable mounting bracket An excellent LED Bow light. Easy to mount Made in USA! On Sale Now. MSRP $242.00, Now $195.00! $209.95